Monthly Archives: February 2015

Aluminum Fence Installation With Ease

In our first installment on aluminum fencing installation we talked a lot about how easy the process can be.  The more detail you put into the planning process the easier the actual labor of installing the fence will be.  Aluminum fence is lightweight and easy to maneuver which helps make it so simple to position.  In our last piece we went into specifics on how detailed planning and patience make putting your fence in a whole lot easier.

The next phase to in the installation process after you have properly planned is the process of preparing the landscape for the new fence.  You must first mark the placement of the aluminum fence.  This can easily be done by hammering in metal stakes and stringing a line between them.  Make the line as taut as possible.  From here marking the location for the posts is the next step.  Adjust the location of the post holes according to the size of the panel.  Measure twice and cut once is a key element in setting the location of the posts.

The string that is already staked out will help guide you throughout the entire process.  It will provide you with a straight edge reference point.  Stay consistent in the placement of your posts.  None of the posts should touch or push your string as this will push the straight edge in one direction or the other which will mess up the continuity of your fence line.

Dig a few holes at a time; don’t dig them all at once.  The holes should be about six inches wide and between twenty four to forty two inches deep.  Again don’t dig all of the holes at once, dig as you go.  Check to ensure that the posts are positioned plumb and true.  It is important that the post is level as the concrete sets.  If they become unlevel your gate may not function as it should.

The actual panel installation is quick and easy.  Start with attaching one section of fence.  This can be done by sliding the notched horizontal rail of the fence into the punched hole of the post.  A screw through the post into the rail will securely attach the rail to the post.  Continue to level each post and pour concrete into each hole that you dig.  It is critical that you level one post and one panel at a time to complete the entire section before moving on.  To truly secure each post add dirt over the concrete and pack it in tight.

As you move on be sure to check the previous sections.  Add on a section of fence and additional posts while continuing to go back to sections of aluminum fence panels that are in place and make sure they stay level and maintained.  Tweak as you go and adjust as needed.  Not only should you use tools to make sure the fence is in level but also be sure to use your sight and personal judgment to adjust as needed.

If the fence ends on a corner it is important to remember that the horizontal rails of the next panel is notched to fit directly into the post.  Once each post is in place and the fence panels are set into place the post caps need to be snapped into place.  You may need a rubber mallet to place them but will not need screws to keep them in place.  Be gentle if you use a mallet so that you don’t damage the post cap material.

Next you will install the gate.  Make sure it is attached and latches correctly.  The gate may take a bit of patience to get into place and working correctly.  Make sure the swinging of the gate is in the direction you want it to be.  Install the hinges using screws and level out the gate.  After the cement is dry and only then is it okay to start using the fence.

With the right tools, a lot of patience and solid directions your aluminum fence should be in place, installed and ready for use after ten to twenty hours after you begin putting it in to place.

iFence USA offers the widest variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for exceptional value and installation advice, you’ll benefit by buying wholesale aluminum fences shipped factory-direct to your home or business anywhere in America from!

Installing An Aluminum Fence With Ease

There is nothing to stress about when it comes to the installation of aluminum fencing. It is the easiest material in fencing to install for several reasons. Even though aluminum is one of the most durable materials it still remains light weight. This makes maneuvering the fence panels simpler. Digging holes is trouble free as the posts used to install aluminum fencing are smaller both wood and vinyl posts. The panels come preassembled and since they are lightweight it moves the project along at an efficient pace. With a short list of tools your fence installation project should only last between ten to twenty hours overall.

When you begin it is important to consider that the project is not something you should rush through. It is not a process that you should look at as something to get over with. A fence should be installed with patience. Take your time to measure twice and cut once.

After you have called to ensure your fence is meeting local and state regulations it is time to start prepping the work site. Before you begin digging you will want to call the local utility companies to come out and identify where all of the underground utilities are located. Next make sure that you have identified your property lines. If you are uncertain it is important to have the property surveyed. You will be held liable if the fence is installed in the wrong location. You will be responsible for the expensive of moving the fence.

If your alumninum fence is being installed around an in ground swimming pool it is crucial that you meet with the pool installer for assistance. They can also help you to plan the installation of your fence around underground lines and pool equipment. You want the lines for the pool to be accessible without having to uproot your entire fence if repairs are needed. Removing one single fence panel is not the end of the world when looking to repair underground lines whereas an entire fence would be overwhelming. Unpack your fence and layout out the materials where they will be installed. Mark off areas that slope and that will require rackable panels. This should be done before you begin installation to ensure the right pieces are in the proper locations.

In our next installment we will talk more about the actual installation process. Half of the installation process is planning half is doing. When installing aluminum fence panels the more you plan the easier the doing will be.

iFence USA offers a variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for value and installation advice, you’ll benefit by buying aluminum fences shipped factory-direct from!

Why Should You Choose Aluminum Fencing

There are a number of reasons that people look into purchasing a fence.  New construction, replacing an existing fence or to enclose a new swimming pool are all some of the motivations that cause homeowners to look into aluminum fencing.  Before the creation of the internet the typical way to purchase fencing was to get multiple quotes from contractors found in the phone book.   Now there is a simpler way; homeowners can quote and order aluminum fencing online, never having to leave the comfort of their own home.

Ordering aluminum fencing online has become such a popular option for a million reasons.  One of the main reasons that online purchases have become so popular is the lower overhead that comes with owning an online company verse a store front.  Another motivation to order online is the convenience that it offers.  You can shop anytime, put an order together and purchase when you are ready to have it shipped. Online support is offered through several methods as well; you may call, email or use online chat methods to get immediate answers regarding your order.

Aluminum fencing has increased in popularity over the past decade.  This is due in part to the growth in number of in ground swimming pools that are installed by homeowners.  Safety regulations make it a requirement to install a safety fence around the pool area.  Aluminum fencing is a popular option because it can be ordered to meet B.O.C.A standards, it is lightweight, maintenance free and easy to install.  Below are some additional incentives to consider when looking into aluminum fence.

The maintenance aspect of aluminum fence is a draw to many homeowners looking to install a fence.  Aluminum is powder coated and finished with a baked enamel coating.  It does not bend, twist or distort shape over time unlike chain link and wood may.  Aluminum stands up to the weather: intense heat or extreme cold.  When you make an aluminum fence purchase you are basically purchasing a fencing that is maintenance free.

Another fantastic feature about aluminum is that is never rusts.  Most aluminum fencing manufactures offer lifetime warranties against chipping, cracking, peeling and fading of their products.

A few other benefits of aluminum fence are that it is not treated with chemicals and is therefore good for the environment as well.  The fencing comes in lightweight panels that are shipped pre-assembled.  The aluminum is also easy to cut if installation adjustments are needed.  Otherwise installation is as simple as setting the posts and inserting the panels into them.

If you look at the benefits and drawbacks of fencing materials you will see that the aluminum fencing offers such a wide range of benefits over the competition.  Whether you are a pool contractor, building contractor, architect, landscaper, or do it yourself homeowner you will find help online with the planning, designing, ordering and installation of your aluminum fence.

iFence USA offers the widest variety of maintenance-free, no-rust aluminum fences and gates in the industry! Whether you are a pool contractor, a building contractor, an architect, a landscaping professional, or a “do-it-yourself” homeowner looking for exceptional value and installation advice, you’ll benefit by buying wholesale aluminum fences shipped factory-direct to your home or business anywhere in America from!