Aluminum Fences
Aluminum Fences
Fast Quote
aluminum driveway gate aluminum driveway gates aluminum driveway gate

Non-Conforming Custom Aluminum Fence Installed
Aluminum Driveway Gates
Aluminum pool fences
Frequently Answered Questions >>

Custom Fences | Aluminum Fences Made-to-order!

Non-conforming conditions are common to fencing, so we offer you real solutions rather than aluminum fence panels and gates in the usual pre-determined heights and widths. Why pay more and end up with something less than what you need? Below are common examples of what we can do. If you don't see a solution here, contact us and our skilled professionals will go to work to find a No-problem aluminum fence solution for you!
Napa Valley Style Premier Grade Black Aluminum Fence Installed On A Farm
Custom Fences | Aluminum Fence Panel Width
image spacer
The standard width for all aluminum fence panels is 6', regardless of grade. The maximum width is 7' for residential grades and 8' for commercial grades. An aluminum fence panel can be ordered in any width from 4' wide to the maximum width in one-foot increments. There is no upcharge for the customization itself and the price of each panel will be calculated based on a price-per-foot formula.

Example: If a 6' wide panel sells for $66, a 4' wide panel would be $44, a seven foot wide panel would be $77, and so on.

4' Wide Custom Aluminum Single Gate
Custom Fences | Aluminum Gate Width
image spacer
The standard width for all aluminum gates is 4' for single (one-leaf) gates and 10' for double (two-leaf) gates. Each aluminum fence grade has a width maximum to maintain structural integrity. For all residential grade gates, the width maximum is 6' per leaf. For our commercial Premier Collection™ aluminum gates, the width maximum is 8' per leaf. Commercial Ultimate Collection™ gates have a 14' per leaf maximum. A custom aluminum gate can be ordered in any width, including inch fractions, up to the maximum size available. There is no upcharge for the customization itself, but all prices will be rounded up to the next size standard price increment.

Example: A single gate ordered to be 56 3/4'' wide will priced as if it were a 5'-wide gate.

Custom Height Aluminum Gate in Black Boca Grande Style Residentail Grade
Custom Fences | Aluminum Panel or Gate Height
image spacer
An aluminum fence panel or a gate may be ordered taller, or shorter, as needed. "Height" is defined as the distance between the top of the top horizontal rail (or the peak of a vertical picket on spear top fences) to the bottom of the pickets. Each grade has height maximums which can be exceeded only when additional horizontal rails are added for structural integrity (additional horizontal rails are another possible customization). Custom fence heights can be ordered in any size increment, including inch fractions, up to the maximum size available. There is no upcharge for the customization itself, but all prices will be rounded up to the next standard price increment.

Example: A double gate ordered with a height of 46 1/4'' will priced as if it were a 4'-high gate.

Custom Aluminum Fence with Different Height Pickets
Custom Fences | Transitional Heights
image spacer
An aluminum fence panel or gate can be constructed with one side taller than the other - not with a curved rail but with a straight rail that is angled. For example, if a custom fence project involved a 4' high fence that needed to become 5' high at a certain point, a transitional panel can be made that is 4' high on one side and 5' high on the other. Or, as in the picture at left, a series of transitional panels can be used to create an arched effect. All transitional height panels or gates must be price quoted.

Hand Railing Fence Panels In White
Custom Fences | Aluminum Welded Fence Panels
image spacer
While all Integrity™ aluminum gates are automatically welded, aluminum fence or hand railing panels can be custom welded when the need arises. Though welding can certainly strengthen an aluminum fence panel, it is not necessary and should be reserved for circumstances that require it. Keep in mind that welding not only adds to the cost of a panel, it "locks" it, making rackability impossible! All custom welding is unique and requires a quote.

Welded Gates Customized In Racked Positions For Installation On Sloped Landscape
Custom Fences | Aluminum Gate Welded in a Racked Position for Installation on a Hill
image spacer
While all Integrity™ aluminum gates are automatically welded for strength and durability, they also can be custom welded when the need arises. For best use and performance of all gates, choose the most level area of your fence run to place your gate. Unlike aluminum fence panels, which can rack (adjust) for installation on slopes, aluminum gates cannot because they are welded in a fixed configuration. Our custom fence solution to the problem of a gate that cannot be installed on level ground is a gate welded in a racked position, adjusted for your unique grade slope. Simply provide us the accurate rise-over-run measurements and we'll build it to specs! Here again, with Integrity™, no problems - only solutions! All custom fence welding is unique and requires a quote.

Additional Horizontal Rails Added On To Bella Vista Residential Aluminum Fence Panels
Custom Fences | Additional Horizontal Rails
image spacer
Extra horizontal rails can be added to any aluminum panel or gate for either function or aesthetic design requirements. Most often, an extra rail is added for the structural integrity of taller fences. Extra rails are not always a "custom fence design". When an extra rail is added for puppy pickets, for instance, it is not considered "custom" because in this case, the extra rail is an automatic attribute of the puppy picket option. We have recommended positions for extra rails, but for custom fence designs they can placed virtually anywhere on the panel or gate. Just keep in mind that most often, aluminum fence panels with customized rail positions have to be installed with blank posts and rail mounting brackets because posts cannot always be punched to correspond to a customized horizontal rail position. Additional rails add to the price of a fence panel or gate based on the grade and the width of the fence panel or gate. Incidentally, additional rails can also be ordered for our Encore!™ aluminum hand railing. Ask for a quote.

Custom Length Aluminum Blank Fence Post
Custom Fences | Length of Aluminum Posts
image spacer
For most Integrity™ aluminum fence panels, corresponding posts come in various lengths depending on the height of the fence. Often a much longer post may be needed. An example of this may be a post needed for a taller, customized panel, as shown in pictures above. Since aluminum fence panels and posts are purchased separately, a corresponding customized post may be necessary. When longer posts are punched, the punches on these longer posts maintain their position in relation to the top of the post. In some cases, the punches themselves can be customized but generally, the use of rail mounting brackets is recommended instead. Longer posts are priced according to their size and wall thickness when ordered with standard punches. Customized punches have added fees. Ask for a quote.

Custom Aluminum Fence Post Flanges Welded Offset in White
Custom Fences | Post Flanges Welded Offset
image spacer
Posts ordered with welded flanges are welded on to the flange plates directly on center. Imagine, though, that you are installing posts up against a structure using flanges and you want the post to "hug the wall". In this case, welding the post off to one side of the flange better enables you to accomplish this method of installation. There is no extra charge for this customization but remember, if not specified "offset" at the time of order, all posts with welded flanges will be welded directly on center!

Custom Fences | Protruding Aluminum Fence Pickets to Fill in the Gaps
image spacer
The use of protruding pickets most often occurs when an aluminum fence needs to "hop" over an obstruction without increasing the gap between the grade and the vertical pickets. A common reason for this is the need to comply with pool codes that mandate a gap maximum so that small children cannot "slip" under the fence. Aside from pool fence codes, protruding pickets may be needed to prevent dogs from slipping out of a fenced-in area when there are unavoidable gaps between the grade and the bottom of the fence. In most cases, longer pickets are added to an order to be later cut-to-fit and installed on to a fence panel on site by first removing the standard pickets. In the case of gates (which are welded), protruding pickets must be factory-installed. Ask for a quote.

Custom Staggered Height Bella Terra Aluminum Fence
Custom Fences | Staggered-height Spear Top Aluminum Fences
image spacer
Many Integrity™ aluminum fence styles are spear top designs, which means their pickets protrude above the top horizontal rail and peak in a pressed point, a Fleur de Lis finial, or an Excelsior™ finial. The peaks of the vertical pickets are even on all of these styles except the Bella Terra™. However, all of these fence styles can have alternating height pickets to create a staggered spear top just like our Bella Terra™ style, which is staggered in its standard design, without the need of customization.

Ornamental Aluminum Fence Panels With Circle Option
Custom Fences | Placement of Aluminum Circles (a.k.a. "Rings")
image spacer
Circles, as a feature, are installed at the top of a fence panel or gate. This standard location can be customized by placing circles at the bottom of a fence in addition to or in lieu of placing them at the top. This is most often done to "dress up" gates, especially Regal Estate™ Aluminum Driveway gates. Just remember that circles must be factory-installed between two horizontal rails, so if they are being added to the bottom of a fence panel or gate, an additional horizontal rail will also be required for which there will be an increase in price. Ask for a quote.

Ventura Aluminum Fencing With Graded Stepping

San Marino Black Aluminum Fence Panels Staggered Heights
Custom Fences | Aluminum Fence Grade Stepping
image spacer
"Stepping" is a method of installation when "racking" or transitional height aluminum fence panels are not desired. With this method, the panels on each side of the post are staggered or "stepped," meaning they are attached at different points on the post causing one panel to be positioned lower than the other. The most common use of the "stepping" method occurs when there is a sudden change of grade, such as when a fence line intersects a retaining wall. In this case, the stepping customization may involve taller posts, taller panels, additional rails, or all of the above. If stepping (in lieu of racking) is being used for installation on a slope, a possible customization may be line posts with staggered-height punches. In these cases, however, we recommend using a combination of rail mounting brackets and blank or end posts. Additionally, something to consider is that unlike rackable panels which cause the fence to follow the grade slope, "stepping" creates triangular gaps between the grade and the bottom of the fence next to the posts because the fence panels remain level and deviate from, rather than follow, the grade slope. These gaps are merely an aesthetic consideration unless a swimming pool is being enclosed, in which case the gaps of the stepping method are not likely to comply with pool safety codes because of the possibility that a small child could slip under the fence. Dogs or other animals may slip through these wider gaps as well. If you want to "step" your fence, we are happy to assist you in buying exactly the right material for your project! Ask for a quote.

Customized Aluminum Fence Colors: Black, Matte Black, Bronze, Matte Bronze, White, Matte White, Matte Sandstone
Custom Fences | Integrity™ Colors
image spacer
There are nine standard Integrity™ colors: black, matte black, bronze, matte bronze, white, matte white, and matte sandstone. Custom colors are available but must be specially quoted. Also keep in mind that custom fence colors will typically lengthen the lead time of your order!

Custom Fences | Your Idea Quoted
image spacer
The above list of possible aluminum fence customizations represents the most commonly chosen iFenceUSA.com custom fence options. But this list is by no means exhaustive! If you have an idea for customization, we want to quote it! Or, if you have a non-conforming site condition that cannot be helped with the above customization ideas, call us for a free consultation. Our trained professionals are aluminum fence experts who are eager to put their energy into the success of your project!




WHAT OUR CLIENTS SAY
"I've received many compliments on the fence and I too have to say how well constructed it is. Several neighbors around the block have fences from other manufacturers and the cross bars, fence posts, etc. are much thinner and reveal dimples where the screws are. I do like the heavier extruded parts. Thank you. Best regards,"

Keith Nicholas
Harrisburg, PA