\n
![\"\"](\"http:\/\/ifenceusa.com\/images\/spacer.gif\"){kind=spacer}
\nIntegrity\u2122 fences are constructed using one of three sizes (grades) of horizontal rail using the below listed configurations. This ”smart” railing is available for purchase independent of panels in one foot length increments ranging from 1′ to 8′ in the following ways:<\/p>\n
- \n
- blank (unpunched)<\/li>\n
- punched for standard picket spacing<\/li>\n
- punched for Extreme\u2122 picket spacing<\/li>\n
- punched Xtra-Rack\u2122 for moderate grade slope<\/li>\n
- punched Max-Rack\u2122 for severe grade slope<\/li>\n<\/ul>\n
Each of the above options is available in all grades with the size of the rail, the size of the punch, and the spacing between punches determined by the chosen grade. SmartRail\u2122 can also be purchased for any Concealed Fastener System (CFS) such as Don Phillips\u2122 fence panels or Encore!\u2122 hand railing. Additionally, SmartRail\u2122 is available in any of our standard colors and comes with rail ends factory-notched unless otherwise indicated. Note: When ordered punched Extreme\u2122, SmartRail\u2122 can be punched Xtra-Rack\u2122 but not MaxRack\u2122.<\/p>\n
SuperRail\u2122 Concealed Fastener System (CFS)<\/span><\/strong>
\n
\nAll Integrity Aluminum Products\u2122 fences use stainless steel fasteners to secure the vertical pickets to the horizontal rails on one side of the fence panel. Powder coated to match the fence, this system is the surest way to secure pickets and minimize fence “rattle.” Now, we offer the option to conceal these fasteners and make your fence even more durable! The unique SuperRail\u2122 system doubles the horizontal rails, hiding the fasteners while adding incredible strength. It also closes off the bottom of the horizontal rails, making the panels virtually insect-free! Choose any style in any collection (Resort, Classic, Premier, and Ultimate) and convert it into The SuperRail\u2122 Concealed Fastener System (CFS). CFS panels come factory-assembled. This optional feature cannot be added to previously built panels.<\/p>\nStationary Rail Mounting Brackets<\/span><\/strong>
\n
\nThis is what you need when a fence panel is being attached directly to a structure such as a pillar or building without the use of a punched post. When necessary, though, they can also be attached to posts. These brackets are available in sizes to fit the horizontal SmartRail\u2122 of any Integrity\u2122 fence grade. Stationary rail mounting brackets are used for ”straight-on” attachments. Angled attachments require adjustable rail mounting brackets (see below). Rail mounting brackets are sold separately in any of our standard Integrity\u2122 colors. Please specify color, type and grade when ordering.<\/p>\nVertically Adjustable Rail Mounting Brackets<\/span><\/strong>
\n
\nFor significant (up-and-down) slopes, these vertically adjustable brackets make it easy to mount Integrity\u2122 Xtra-Rack\u2122 or Max-Rack\u2122 fence panels to blank (not pre-punched) fence posts or structures such as pillars or buildings. These brackets are available to fit the railing of any Integrity\u2122 fence grade and sold separately in any of our standard Integrity\u2122 colors. Please specify color and grade when ordering.<\/p>\nHorizontally Adjustable Rail Mounting Brackets<\/span><\/strong>
\n
\nFor sharp (left-to-right) 45 degree angled turns, these horizontally adjustable brackets make it easy to mount standard fence panels to Integrity\u2122 fence posts or structures such as pillars or buildings. These brackets are available to fit the railing of any Integrity\u2122 fence grade and sold separately in any of our standard Integrity\u2122 colors. Please specify color and grade when ordering.<\/p>\nRail Clipper<\/span><\/strong>
\n
\nAlso called a ”rail end notcher”, this tool is used to “notch” the ends of the horizontal SmartRail\u2122 of an Integrity\u2122 fence, allowing it to slide into the narrower punched holes of a post. Since horizontal rails come factory-notched, this tool has limited use for do-it-yourself installation and is most often used by high volume contractors who cut and ”re-notch” horizontal railing on-the-job. Comes standard for residential grade notching, commercial grade conversion kits are sold separately.<\/p>\nEncore!\u2122 Top Rail<\/span><\/strong>
\n
\nAny of the four Encore!\u2122 hand railing top rail design profiles can be purchased separately by-the-foot in one-foot increments up to 10′ long. This top rail is designed as a concealed fastener system (CFS), with the outer profile snapped together with an inverted Premier\u2122 grade horizontal SmartRail\u2122. Sold together as a unit here, either component can be quoted separately upon request. Available in any of our standard colors. Visit our Encore!\u2122<\/a> link for more information.<\/p>\nEncore!\u2122 Lower Rail<\/span><\/strong>
\n
\nThe lower rail of any Integrity Encore!\u2122 hand railing panel is actually Premier\u2122 grade SuperRail\u2122 Concealed Fastener System (CFS) and can be ordered separately by-the-foot.<\/p>\nEncore!\u2122 Rail Mounting Brackets<\/span><\/strong>
\n
\nIntegrity Encore!\u2122 hand railing panels are installed by being attached to blank posts using mounting brackets. These rail mounting brackets are unique and not interchangeable with our fence rail mounting brackets. Based on your requirements, order any of the following types in any of our standard Integrity\u2122 colors:<\/p>\nEncore!\u2122 Top Rail Brackets with or without Tabs*<\/p>\n
- \n
- stationary top rail mounting bracket<\/li>\n
- horizontally adjustable top rail mounting bracket<\/li>\n
- vertically adjustable top rail mounting bracket<\/li>\n<\/ul>\n
Encore!\u2122 Lower Rail Brackets with or without Tabs*<\/p>\n
- \n
- stationary lower rail mounting bracket<\/li>\n
- horizontally adjustable lower rail mounting bracket<\/li>\n
- vertically adjustable lower rail mounting bracket<\/li>\n<\/ul>\n